Crosby

General: The IP10 vertical lifting clamp is used for the lifting, turning, moving or vertical transfer of sheet, plates, or fabrications
from horizontal to vertical and down to horizontal (180°) as needed. Usually used as a single point pick or when used
with a spreader beam with multiple vertical drop lines.
Wide variety of jaw openings from 0 to 155 mm. Available in a variety of styles:
• IP10 - Standard clamp for materials with a surface hardness to 37Rc (345 HB).
• IP10J - Larger jaw opening.
• IP10S - For use with Stainless Steel material.
• IP10H - For use with materials with a surface hardness to 47Rc (450 HB).
• Full 180° turning range for material transfer, turning or moving.
• Lock open, lock closed ability with latch for pretension on material and then release of material.
• Optional IP-5000 Stinger assembly available. Allows for easy connection between the clamp and hoist hook.


Design factor: Based on EN 13155.


  • Marking: Logo, WLL, jaw capacity, serial number, proof load test date and CE-marking.
  • Finish: Orange/blue painted.
  • Note: Min load is 10% of WLL.
IP10
IP10 DRAW IP10 DRAW1
Select a row from the table below, then click the add to quote button
Art No WLL
Ton
Type Jaw A B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) H (mm) K (mm) J (mm) Weight
kg
CAD
16.012702275 0.5 IP10/S 0 - 16 44 128 207 30 115 41 28 10 1.8
16.012702263 1 IP10/S 0 - 20 45 139 215 30 126 41 38 10 2
16.012702277 2 IP10/S 0 - 35 78 201 336 70 190 61 55 16 6.8
16.012702265 3 IP10/S 0 - 40 100 253 436 75 225 78 60 20 13.8
16.012702267 4.5 IP10/S 0 - 40 100 253 436 75 232 82 65 20 15
16.012702269 6 IP10/S 0 - 50 126 302 525 80 292 84 95 20 40 23.5
16.012702271 9 IP10/S 0 - 50 126 325 557 80 310 92 105 25 44 27.5
16.012702279 12 IP10/S 0 - 54 160 391 623 80 331 117 137 25 41 49

Download CAD

Description

Get CAD
Download