• Not for lifting

General: Splice sock designed for splicing cable, synthetic rope, steel wire rope and hose. Consists of two DE socks that are assembled in the middle with a ferull. Can be used for change of non-rotating crane ropes. Two DE socks assembled with swivel should be used when replacing a6 - and 8-wired steel wire rope so that no torque will be transferred onto the new wire rope.



  • Rope construction: : Braided of double wires.
  • Material: : Steel wire - galvanized.
  • Warning: Margin of safety is applied to all specified breaking loads. Additional safety factors, depending on area of ​​use should be applied. CERTEX recommends a safety factor of 3:1 for horizontal pulls and 5:1 for overhead pulling. The breaking load varies with the material, shape, and also the diameter of the product.
KD_225mm
Pulling grip
Select a row from the table below, then click the add to quote button
Part Code MBL
t
Grip Ø
mm
Length Eye Length Net Weight
kg
CAD
10.42SK000812 0.885 8-12,5 45 800 0.4
10.42SK001215 1.41 12,5-15,5 60 1,100 0.65
10.42SK001519 1.76 15,5-19 75 1,200 0.8
10.42SK001925 2.1 19-25 85 1,200 1.2
10.42SK002538 3.03 25-38 120 1,200 1.5
10.42SK003850 4.39 38-50,5 155 1,200 1.75
10.42SK005063 5.85 50,5-63,5 190 1,200 2.1
10.42SK006376 7.22 63,5-76 225 1,200 2.4
10.42SK007689 7.22 76-89 250 1,300 2.6
10.42SK089101 9.03 89-101,5 285 1,300 2.8
10.42SK101114 10.83 101,5-114 310 1,300 3.1

Download CAD

Download CAD by choosing the desired product from the table above and the format from the menu below. Click "Get CAD" and after the load reaches 100% you can click on the download icon to download it. Please note that CAD drawings are only available if the icon at the right side of the table above is colored and not grayed out.

Get CAD
Download