Wire rope grip approved for lifting.
Note: The wire rope grip can be used with 6 or 8-strand steel wire ropes with steel or fiber core, in a wire rope quality of up to 1960 N/mm2. When properly assembled, the assembly can handle up to 80% of the minimum breaking load of the steel wire rope (MBL). Correctly mounted the assembling will stand 80% of the rope's minimum breaking load (MBL).
Not for use with compacted or hammered wire ropes.
It is not recommended to use plastic covered ropes for lifting purposes with wire rope clamps.
Follow the fitting instructions in the user manual before use.
- Material: 4-5 and 6 mm are casted, the rest are dropforged.
- Finish: 4-5 and 6 mm zinc-plating, the rest hot dip galvanizing.
- Warning: In case the clamps half-parts tangent each other when tightening the bolts, a smaller EUREKA wire clamp shall be used.
Download CAD by choosing the desired product from the table above and the format from the menu below. Click "Get CAD" and after the load reaches 100% you can click on the download icon to download it. Please note that CAD drawings are only available if the icon at the right side of the table above is colored and not grayed out.