PP-Slings for Timber Packages

For use: Sling for timber packages.
Design: Spliced eye in each end or spliced endless.


*In combination with synthetic/soft slings always use a spreader with a length that corresponds with 2/3 of the average length of the packages.
*Make sure to place the slings so that the center

Show more

Part code:

For use: Sling for timber packages.
Design: Spliced eye in each end or spliced endless.


*In combination with synthetic/soft slings always use a spreader with a length that corresponds with 2/3 of the average length of the packages.
*Make sure to place the slings so that the center point is in the middle.
*Do not place soft slings so that they can roll over/on the metal straps on the package.
*Never store or leave pp-slings for longer periods outdoors as polypropylene then ages and looses in capacity.
*Slings should always be inspected by authorized personal prior to use.
*Check the weight of the packages, average weight is not enough max weight must be checked.
*Avoid placing slings on the quay where they can be over run by trucks etc, over run slings should immediately be discarded.
*Don't forget to calculate for angels and deduct all loses for these, as well as for small radius of hooks etc.

  • Material: Polypropylene, 3 stranded rope.
  • Marking: The slings are provided with a brown label accordingly marked.
  • Safety factor: 6:1

Product FAQ

What is the working load limit (WLL) range for this sling?
The working load limit (WLL) of this sling varies across the available variants and lifting configurations. Across the range of variants, the WLL spans from 1.7 to 3.4 tons.