• Not for lifting

General: Splice stockings intended for splicing steel cable and wire that require large pulling forces, which are difficult to grip. Consists of two LE socks that are assembled in half with a steel cable. When changing a wire rope of 6 - and 8-wires you should use two LE-socks intertwined with minstrel used to prevent any torque to be transferred to the new wire rope.



  • Rope construction: : Braided - triple, double and single.
  • Material: : Steel wire - galvanized.
  • Warning: Margin of safety is applied to all specified breaking loads. Additional safety factors, depending on area of ​​use should be applied. CERTEX recommends a safety factor of 3:1 for horizontal pulls and 5:1 for overhead pulling. The breaking load varies with the material, shape, and also the diameter of the product.
K41_225mm
Pulling grip
Select a row from the table below, then click the add to quote button
Part Code MBL
t
Grip Ø
mm
Length Eye Length Net Weight
kg
CAD
10.42SL000612 1.63 6,5-12,5 200 1,520 0.48
10.42SL001319 3.17 13-19 200 1,830 1.04
10.42SL001925 4.54 19-25 250 2,340 1.4
10.42SL002531 8.12 25-31,5 250 2,830 2.76
10.42SL003238 10.72 32-38 250 3,100 4.12
10.42SL003844 10.72 38-44 250 3,300 4.38
10.42SL004457 16.92 44,5-57 300 3,870 7.2

Download CAD

Download CAD by choosing the desired product from the table above and the format from the menu below. Click "Get CAD" and after the load reaches 100% you can click on the download icon to download it. Please note that CAD drawings are only available if the icon at the right side of the table above is colored and not grayed out.

Get CAD
Download